Because plaster or drywall is too flimsy to actually support extra weight, finding the stud is an important first step if you want to hang a shelf or piece of artwork on the wall. You don’t necessarily have to get a stud finder to do this, though. In this post, your experts at Handyman Connection of Butler Warren will teach you how to find wall studs without a stud finder.
Spotting the Signs
First, shine a flashlight at a steep angle against the wall. You’ll most likely see an area of the wall with strange bumps or dimples. These irregularities are caused by the nails securing the surface of the wall to the studs. If you see this “row” of bumps, chances are there’s a stud underneath them.
Check the Baseboard
The baseboard is nailed to the studs themselves and the outlets are usually attached to the side. The area around the electrical switch is also mounted on the sides of the studs. The area where you want to hang your new wall additions should be close to them.
Spotting the Next Stud
Once you’ve found the first wall stud, the next one isn’t too far off. Its “neighboring” wall stud is 16 or around 24 inches away from it. Simply look for the dimples and bumps near the first wall stud and you’ll be able to find the next one.
You can also drive a small nail into the wall to check for the wall stud. If the nail doesn’t hit wood under the plaster or drywall, then insert a wire hanger. Twist it and you’ll most likely hit the stud, which is usually just a few inches off from where you drove the small nail into.
Our experts at Handyman Connection of Butler Warren will help you find these wall studs. We’ll also help you with your upcoming remodeling project. Call us today at (513) 282-3032 or fill out our form to learn more about our services.